Compact & Powerful Drilling Machine

“Great! I find it to be extremely easy to assemble and use. It works great and I haven't had any issues with it. I've used it about 10 times for various metals and it has always gone through without a hitch.”
- Marco T.

Why Buy Our Drill Press?

✅Powerful: It has an 8-inch swing, 2-inch spindle travel, 1/2-inch keyed chuck, 2.4A induction motor (1/3 HP), this machine is small yet powerful enough to drill through metal, wood, plastics, and other materials for both the job and the garage.

✅Adjustable Speed: It has 5 operating speeds: (660/1,140/1,740/2,340/3,000 RPM) allowing you to target the exact speed that works best for your project. It is more handy and precise than a handheld drill.

✅Compact Design: The benchtop drill press's frame is made of cast iron for long-lasting durability and precise drilling. For angled drilling, the worktable can be inclined 45 degrees left and right. Predrilled holes in the base allow it to be mounted to a bench or work stand. Clamps and vises can be mounted on the slotted table for excellent work-holding.

📝Frequently Asked Questions:

Q: Does it have a certification?
A: Yes this is CSA Certified.

Q: Can it bevel left to right?
A: Yes, the worktable bevels can adjust the angle (45°left and right). Loosen the bevel lock bolt with a hex wrench, and tilt it to the desired angle.

Q: Does it features a work light?
A: It comes with a work light, you can focus on your work area, for an easy and accurate job. (Batteries are needed to light up the work light.)

Q: What are the exact inches of the keyed chuck?

A: It has 1/2 inch Keyed Chuck. It gives you versatility with a variety of bits, Compatible with Drill Bits' diameters from 1/16 to 1/2 inch.

Note:

• It has 2-1/2 inch jaws that can open up to 2-1/10 inches
• You can use a drill bit set ranging from 1/16 to 1/4 inch
• This machine is universal and necessary for various applications including but not limited to wood, plastics, and metals.

GET YOURS NOW!